Otherware/Otherware_1_SB_Development.iso/mac/util/comm/arateleb.sit/Telebit T2500

Text File | 1992-10-27 | 3.3 KB | 207 lines

! "Telebit T2500 Modem - 10/26/92"
@ORIGINATE
@ANSWER
!
serreset 19200, 0, 8, 1
!
! first set the factory configuration to Enhanced Command Mode
!
settries 0
@LABEL 1
pause 5
matchclr
matchstr 1 3 "OK\13\10"
write "AT&F0\13"
matchread 30
inctries
iftries 2 59
! Modem is not responding, reset and send a break
DTRClear
pause 5
DTRSet
SBreak
jump 1
!
! Turn off echo and flow control.  Reset when DTR is dropped.
!    Turn on enhanced result codes.
!
@LABEL 3
matchclr
matchstr 1 4 "OK\13\10"
write "AT E0 S58=0 S68=0 S52=1 X1\13"
matchread 30
jump 59
!
! Turn off Error Control and buffering.
!
@LABEL 4
pause 5
matchclr
matchstr 1 5 "OK\13\10"
write "AT S95=0 S96=0 S97=0 S98=0 S66=0\13"
matchread 30
jump 59
!
! If speaker on flag is true, jump to label 8.  Else turn off the speaker
!
@LABEL 5
pause 5
ifstr 2 8 "1"
matchstr 1 8 "OK\13\10"
write "ATM0\13"
matchread 30
jump 59
!
! The modem is ready so enable answering, or originate a call
!
@LABEL 8
pause 5
ifANSWER 30
note "Dialing ^1" 3
write "AT S0=0 DT^1\13"
!
@LABEL 9
matchstr  1 11 "CONNECT 1200\13\10"
matchstr  2 12 "CONNECT 2400\13\10"
matchstr  3 13 "CONNECT 4800\13\10"
matchstr  4 14 "CONNECT 9600\13\10"
matchstr  5 15 "CONNECT FAST\13\10"
matchstr  6 50 "NO CARRIER\13\10"
matchstr  7 50 "ERROR\13\10"
matchstr  8 52 "NO DIALTONE\13\10"
matchstr  9 53 "BUSY\13\10"
matchstr 10 54 "NO ANSWER\13\10"
matchread 700
jump 59
!
@LABEL 11
note "Communicating at 1200 bps." 2
serreset 1200, 0, 8, 1
jump 16
!
@LABEL 12
note "Communicating at 2400 bps." 2
serreset 2400, 0, 8, 1
jump 16
!
@LABEL 13
note "Communicating at 4800 bps." 2
serreset 4800, 0, 8, 1
jump 16
!
@LABEL 14
note "Communicating at 9600 bps." 2
serreset 9600, 0, 8, 1
jump 16
!
@LABEL 15
note "Communicating at 19.2 kbps." 2
serreset 19200, 0, 8, 1
!
@LABEL 16
ifANSWER 17
pause 30
@LABEL 17
exit 0
!
! @ANSWER
! Set up the modem to answer
@LABEL 30
write "ATS0=1\13"
matchstr 1 31 "OK\13\10"
matchread 30
jump 59
!
@LABEL 31
matchstr 1  32 "RING\13\10"
matchstr 2  11 "CONNECT 1200\13\10"
matchstr 3  12 "CONNECT 2400\13\10"
matchstr 4  13 "CONNECT 4800\13\10"
matchstr 5  14 "CONNECT 9600\13\10"
matchstr 6  15 "CONNECT FAST\13\10"
matchstr 7  50 "NO CARRIER\13\10"
matchstr 8  50 "ERROR\13\10"
matchstr 9  52 "NO DIALTONE\13\10"
matchstr 10 53 "BUSY\13\10"
matchstr 11 54 "NO ANSWER\13\10"
matchread 700
jump 31
!
@LABEL 32
userhook 1
note "Answering phone╔" 2
jump 31
!
! 50: error messages
!
@LABEL 50
exit -6021
!
@LABEL 52
exit -6020
!
@LABEL 53
exit -6022
!
@LABEL 54
exit -6023
!
@LABEL 59
exit -6019
!
! Hang up the modem
!
@HANGUP
@LABEL 60
settries 0
@LABEL 61
pause 5
write "ATH\13"
matchclr
matchstr 1 63 "OK\13\10"
matchstr 2 63 "NO CARRIER\13\10"
matchstr 3 63 "ERROR\13\10"
matchread 30
inctries
iftries 3 63
! no response, try escape sequence
pause 5
write "+++"
matchclr
matchstr 1 62 "OK\13\10"
matchread 15
!
! No response from modem, toggle DTR
!
DTRClear
pause 5
DTRSet
jump 61
! Pause 1 second before to ensure we meet the escape time delay
@LABEL 62
pause 10
Flush
write "ATH\13"
matchstr 1 63 "OK\13\10"
matchstr 2 63 "NO CARRIER\13\10"
matchstr 3 63 "ERROR\13\10"
matchread 30
jump 61
!
! Recall factory settings
!
@LABEL 63
matchclr
matchstr 1 64 "OK\13\10"
write "AT&F0\13"
matchread 30
! turn off auto answer, set S51 so modem will check interface speed on next command
@LABEL 64
matchclr
matchstr 1 65 "OK\13\10"
write "ATS51=254S0=0\13"
matchread 30
!
@LABEL 65
exit 0